


Comparison of Grate Furnace Incineration Treatment Technology and Pyrolysis Gasification Treatment Technology | ||
Compare Content | Grate Furnace | Pyrolysis Gasifier |
Incineration Mechanism | The Garbage Is Directly Burned, The Combustion Temperature Is 800~1000°C, The Incineration Mechanism Is General | Using Two-Stage Treatment, The Garbage Is Now Pyrolyzed And Gasified, And Then Small-Molecule Combustible Gas Is Burned. The Combustion Temperature Is 850~1100℃. The Incineration Mechanism Is Advanced. |
Furnace Structure And Grate Material | The Structure Is Complex And The Shape Is Large; The Grate Works Under High Temperature, And The Requirements For The Grate Material Are High | The Structure Is Relatively Simple And Compact; The Grate Works In A Low Temperature State, And The Requirements For The Grate Material Are Low |
Types Of Garbage | Dispose Of Domestic Waste | It Can Process Domestic Waste, Industrial Waste, And Hazardous Waste With High Calorific Value (Including Medical Waste) |
Area (300t/D) | 40-50 Acres Higher | 30-40 Acres Lower |
Operating Cost Fly Ash Emissions | Fly Ash Discharges A Lot, Accounting For About 5% Of The Total Garbage | Fly Ash Emission Is Low, Accounting For About 1% Of The Total Garbage, Which Is Environmentally Friendly |
Acidic Substance And Dust Emission | The Original Value Of Acidic Substances Such As So2 And Nox Is Relatively High; The Dust Emission Concentration Is 6000~8000mg/Nm3 | The Original Value Of Acidic Substances Such As So2 And Nox Is Relatively Low: The Dust Emission Concentration Is ≤3000mg/Nm3 |
Plant Environment | It Is Difficult To Control The Environment In The Plant Area. The Incinerator Workshop Has A Certain Amount Of Bottom Ash And Leachate, Noise, And Odor Pollution. | The Factory Environment Is Well Controlled, And The Bottom Ash, Noise, And Odor Pollution In The Workshop Are Low |
-
Waste Gasification Power Plant
Waste gasification power plant: capacity from 1000kw to 6000kw, modular design, several modular for big capacity.
Views More -
Waste Gasifier
Waste Gasifier: single furnace treatment capacity up to 50 ton/day, it can treat household waste, industrial waste and medical waste.
Views More -
Biomass Gasification Power Plant
Biomass gasification power plant: capacity from 200kw to 3000kw, 1kg woody biomass generate 1kw electricity, 1kw woody biomass produce 2-3m3/h syngas, syngas heat value 1100-1500kcal/m3.
Views More -
Biomass Gasifier
Applicable raw materials: a wide range of raw materials, such as straw, wood chips, rice husk, palm shell, bagasse and other agricultural and forestry wastes
particle size: 30-50mm, water content: less than 20%Views More





Bioenergy (Biofuels and Biomass) | EESI
Description. Biomass can be used to produce renewable electricity, thermal energy, or transportation fuels ( biofuels ). Biomass is defined as living or recently dead organisms and any byproducts of those organisms, plant or animal. The term is generally understood to exclude coal, oil, and other fossilized remnants of organisms, as well as soils.
Characterization of non-edible lignocellulosic biomass in
Aug 13, 2018 · Lignocellulosic biomass off late are considered as potential feedstock for biofuel production to meet the world energy demand. For designing the process to convert biomass into an alternative source of energy, it is essential to determine the characteristics of these lignocellulosic biomass. The aim of the present study is to determine the physicochemical characterization of selected non
Where will biofuels and biomass feedstocks come from? | Grist
Jan 22, 2008 · There are many approaches to production of feedstock for biofuels. To make a material impact in replacing gasoline, major feedstocks need to collectively produce more than a hundred billion
Thermal pyrolysis and kinetic parameter determination of
Ash is high as compared with some other biomass materials such as bagasse, cotton stalk, wheat straw, etc., which means that the investigated material contain high silica judging by our higher percentage ash content. 2,3,48 This contributes to some extent in deposition of ash problems such as slagging and fouling. One of the constituents makes
Making Your Own Biomass Pellets from Cotton Stalk
Cotton stalk is the main biomass available in the field after the harvest of cotton, which are often disposed of by burning in the field. With the development of modern technology, cotton stalks can be turned into stalk pellets by a wood pellet mill in stalk pellet production line .
Use biomass briquette machine to produce heating bio fuel
Briquette size: 30-80 mm (in diameter) Capacity per set: 100-350 kg. Screw bio briquettes machine is a good choice for dealing with small amount of biomass, the briquette theory of the machine is the but with a different way, the temperature growth of the raw material comes from the screw briquette process as well as the heating ring, and
Cotton Plant Stalk – An Alternate Raw material to Board Industry
Sep 10, 2007 · The biomass available after the harvest of seed cotton is rich in cellulose, hemicellulose and lignin which is akin to most of the hard woods and therefore an excellent raw material for preparing composite boards, pulp and paper and raising edible oyster mushrooms. Amongst these options, preparation of particle boards has been found to be
A burning issue: biomass is the biggest source of renewable
Biomass is a broad term covering all organic material including that from plants, trees (for example straw, crops or wood) and animals (for example poultry litter). It is considered a renewable form of energy production as biomass growth removes carbon dioxide from the atmosphere and stores it in the soil, plants or trees.
Molten salt pyrolysis of biomass: The mechanism of volatile
Dec 15, 2020 · Materials. The feedstock sample, cotton stalk, was taken from Ezhou (Hubei, China). Cotton stalk particles with size of 0.1–0.4 mm were prepared after grinding and sieving to ensure fine contact with molten salt. Before the property analyses, samples were dried for 20 h to remove the moisture.
Bioethanol Production from Renewable Raw Materials and Its
Production of bioethanol from the raw materials that contain lignocellulose is attractive and sustainable because lignocellulosic biomass is renewable and non-competitive with food crops. Furthermore, the use of bioethanol obtained from lignocellulosic biomass is related to the considerable reduction of greenhouse gas emission ( 44 ).
Biomass - Wikipedia
Biomass is plant-based material used as fuel to produce heat or electricity. Examples are wood and wood residues, energy crops, agricultural residues, and waste from industry, farms and households. Since biomass can be used as a fuel directly (e.g. wood logs), some people use the words biomass and biofuel interchangeably.
Fiberboards made from corn stalk thermomechanical pulp - NCSU
Chemical Analysis of Corn Stalk Raw Material and Pulp. Corn stalk contains more cellulose but has relatively low lignin content compared to commonly used wood fibers from pine and eucalyptus (Mancera et al. 2012), which suggests its suitability as an alternative for industrially manufactured fiberboards and papers. The corn stalk raw material
(PDF) Introduction to biomass and its composites
Introduction to biomass and its composites 3. methods, such as landfilling, composting, or anaerobic digestion. The use of organic. waste and residue materials in polymer composites represents an
Materials Terminology Guide - textileexchange.org
materials in unprocessed or minimally processed states, e.g., cotton, raw latex, crude oil, raw biomass, logs, or "any product of agriculture, forestry, fishing or mineral in its natural form or which has undergone the transformation required to prepare it for international marketing in
Biofuels explained - U.S. Energy Information Administration (EIA)
Use of hydrogen. The term biofuels usually applies to liquid fuels and blending components produced from biomass materials called feedstocks. Most biofuels are used as transportation fuels, but they may also be used for heating and electricity generation. Gaseous fuels produced from biomass that are used directly as a gas or converted to liquid
-
Rotary Automatic Slag Burner
Applicable raw materials: wood chips, straw briquette, bark, building templates, pellets
Diameter: <10cm Moisture content: <15% -
Chain Grate Semi-Gasification Burner
Applicable raw materials: wood chips, straw briquette, bark, building templates, pellets
Diameter: <10cm Moisture content: <15% -
Waste Gasification Power Plant
Waste gasification power plant: capacity from 1000kw to 6000kw, modular design, several modular for big capacity.
-
Waste Gasifier
Waste Gasifier: single furnace treatment capacity up to 50 ton/day, it can treat household waste, industrial waste and medical waste.
-
Biomass Gasification Power Plant
Biomass gasification power plant: capacity from 200kw to 3000kw, 1kg woody biomass generate 1kw electricity, 1kw woody biomass produce 2-3m3/h syngas, syngas heat value 1100-1500kcal/m3.
-
Biomass Gasifier
Applicable raw materials: a wide range of raw materials, such as straw, wood chips, rice husk, palm shell, bagasse and other agricultural and forestry wastes
particle size: 30-50mm, water content: less than 20%