Haiqi Biomass Gasifier
Home » News » Haiqi Biomass Gasifier » gasification types in Printing And Dyeing Industry

gasification types in Printing And Dyeing Industry

Applicable raw materials: straw, wood chips, rice husk, palm shell, bagasse and other agricultural and forestry wastes.
Particle size: 30-50mm
Water content: less than 20%
Share With :
Product Description
Comparison of Grate Furnace Incineration Treatment Technology and Pyrolysis Gasification Treatment Technology
Compare Content Grate Furnace Pyrolysis Gasifier
Incineration Mechanism The Garbage Is Directly Burned, The Combustion Temperature Is 800~1000°C, The Incineration Mechanism Is General Using Two-Stage Treatment, The Garbage Is Now Pyrolyzed And Gasified, And Then Small-Molecule Combustible Gas Is Burned. The Combustion Temperature Is 850~1100℃. The Incineration Mechanism Is Advanced.
Furnace Structure And Grate Material The Structure Is Complex And The Shape Is Large; The Grate Works Under High Temperature, And The Requirements For The Grate Material Are High The Structure Is Relatively Simple And Compact; The Grate Works In A Low Temperature State, And The Requirements For The Grate Material Are Low
Types Of Garbage Dispose Of Domestic Waste It Can Process Domestic Waste, Industrial Waste, And Hazardous Waste With High Calorific Value (Including Medical Waste)
Area (300t/D) 40-50 Acres Higher 30-40 Acres Lower
Operating Cost Fly Ash Emissions Fly Ash Discharges A Lot, Accounting For About 5% Of The Total Garbage Fly Ash Emission Is Low, Accounting For About 1% Of The Total Garbage, Which Is Environmentally Friendly
Acidic Substance And Dust Emission The Original Value Of Acidic Substances Such As So2 And Nox Is Relatively High; The Dust Emission Concentration Is 6000~8000mg/Nm3 The Original Value Of Acidic Substances Such As So2 And Nox Is Relatively Low: The Dust Emission Concentration Is ≤3000mg/Nm3
Plant Environment It Is Difficult To Control The Environment In The Plant Area. The Incinerator Workshop Has A Certain Amount Of Bottom Ash And Leachate, Noise, And Odor Pollution. The Factory Environment Is Well Controlled, And The Bottom Ash, Noise, And Odor Pollution In The Workshop Are Low

gasification types in Printing And Dyeing Industry

View More

textile industries - Arvind Envisol

Textiles, one of the major industries in the world consists of numerous proceshaiqi like spinning, weaving, dyeing, singeing, and scouring. The dyeing process is explicitly water intensive, roughly about 200L of water is used to produce 1 kg of textile. Depending on the type of fiber used-cellulose, protein or synthetic, various kinds of dyes are

List of Different Types of Fabric Dyes in Textile Industry

Feb 18, 2021 · Leveling acid dyes and Lancet acid dyes are the two popular types of acid dyes. 4. All-Purpose Dyes. All-Purpose Dyes. It is a mixture of different types of dyes in which direct dye is combined with acid dye to make a new dye, which is suitable for a range of fabrics.

Types Of Biomass Gasifier in Printing And Dyeing Industry

Biomass gasification power plant: capacity from 200kw to 3000kw, 1kg woody biomass generate 1kw electricity, 1kw woody biomass produce 2-3m3/h syngas, syngas heat value 1100-1500kcal/m3.

Gasification Of Woody Biomass in Printing And Dyeing Industry

Types Of Garbage: Dispose Of Domestic Waste: It Can Process Domestic Waste, Industrial Waste, And Hazardous Waste With High Calorific Value (Including Medical Waste) Area (300t/D) 40-50 Acres Higher: 30-40 Acres Lower: Operating Cost Fly Ash Emissions: Fly Ash Discharges A Lot, Accounting For About 5% Of The Total Garbage

history of gasification in Printing And Dyeing Industry-Haiqi

The Future of Gasification - Synthesis Energy Systems, Inc.significantly. If the gasification industry continues to think about coal gasification as it has been historically defin Tel: +8615637015613

CN205323981U - Printing and dyeing industry forming machine

The utility model disclohaiqi a printing and dyeing industry forming machine waste gas wet -type static processing apparatus and technology, forming machine waste gas wet -type static processing apparatus divides four sections and other supporting parts, four sections from top to bottom respectively for the upper cover of giving vent to anger, go up box, well box and box down, intersegmental

Dyeing And Printing || Differences - Textile Fashion Study

Sep 13, 2012 · Dyeing And Printing. Dyeing and printing are two major wet processing techniques eventually for the coloration of fibers, yarns, and, fabrics in the industry. Consequently, only one color produces in the dyeing process but various types of colored designs produces on the fabric surface in the printing process.


May 10, 2020 · Skein dying is a way of dyeing yarn through dipping skeins or loosely wound hands of yarns into dye vats. Yarns used for knitting are typically processed this way. Skein dyeing is one of the oldest and expensive methods of coloring yarn, but it remains significant for it can color small portions of yarn.

Pry mounted LNG gasification and pressure regulating

Mar 12, 2018 · The extensive application of natural gas flow 200m3/h ~ 2000m3/h (when the flow is greater than 2000m3/h, LNG gasifier based site, this site alone) equipment short period, small investment, convenient use, widely used in ceramics, printing and dyeing, metal pipe and other industrial gas industry, boiler, coal gas mixing station in the industry.

Dyeing, Fabric Printing and Garment Finishing for Textile Mills

Feb 11, 2020 · Spinning and weaving are such stages which focus on the quality of fabrics whereas; dyeing, printing and finishing focuhaiqi on colours and appearance of the fabric. This ultimately leads to increase in the product value. Simply, this proceshaiqi changes the fabric in chemical aspects as reflecting light seems coloured and allots an impression to it.

Fifteen industrial wastewater treatment proceshaiqi | LCDRI CN

Sep 10, 2019 · 3. Printing and dyeing industrial wastewater. The printing and dyeing industry uhaiqi a large amount of water, and usually consumes 100 to 200 tons of water per 1 t of textiles. 80%~90% of them are discharged by printing and dyeing wastewater. Commonly used treatment methods are recycling and harmless treatment. Recycle and re-use:

Textile Dyeing Wastewater Treatment - IntechOpen

1.2 Production of textile industry pollution Textile Printing and dyeing proceshaiqi include pr e-treatment, dyeing an d printing, finishing. The main pollutants are haiqi matters which come from the pre-treatment process of pulp, cotton gum, cellulose, hemicellulose and al kali, as well as additives and dyes using in dyeing and printing proceshaiqi.

Fixed Bed Updraft Gasifier in Printing And Dyeing Industry

Nov 04, 2016 · Gasification proceshaiqi can be categorized into three groups: entrained flow, fluidized bed and moving bed (sometimes called, somewhat erroneously, fixed bed). • In gasifier Fuel Interacts with air or Oxygen and steam. So the gasifier are classified according to the way air or oxygen is introduced in it. Get Price


May 19, 2021 · Despite the textile industry’s limited use of PFAS mahaiqials, future regulation may impact producers of performance fabrics. By Hardy Sullivan. G iven the wide array of end uhaiqi for per- and polyfluoroalkyl substances (PFAS), producers of performance fabrics, including personal protective equipment (PPE) gowns with superior blood repellency

Research progress on co-cultivation of microorganisms in the

An obvious advantage of the symbiotic system in degrading printing and dyeing wastewater is that different strains can degrade dye molecules at different adsorption sites, or can use metabolites produced by another strain to further degrade, and in some cahaiqi can mineralize the printing and dyeing wastewater[2].The symbiosis system can be composed

If you would like to contact us for more information about our products, please fill out the form below, thank you.
* Company name:
* Email:
* Content:
Contact Emaii Whatsapp