


Comparison of Grate Furnace Incineration Treatment Technology and Pyrolysis Gasification Treatment Technology | ||
Compare Content | Grate Furnace | Pyrolysis Gasifier |
Incineration Mechanism | The Garbage Is Directly Burned, The Combustion Temperature Is 800~1000°C, The Incineration Mechanism Is General | Using Two-Stage Treatment, The Garbage Is Now Pyrolyzed And Gasified, And Then Small-Molecule Combustible Gas Is Burned. The Combustion Temperature Is 850~1100℃. The Incineration Mechanism Is Advanced. |
Furnace Structure And Grate Material | The Structure Is Complex And The Shape Is Large; The Grate Works Under High Temperature, And The Requirements For The Grate Material Are High | The Structure Is Relatively Simple And Compact; The Grate Works In A Low Temperature State, And The Requirements For The Grate Material Are Low |
Types Of Garbage | Dispose Of Domestic Waste | It Can Process Domestic Waste, Industrial Waste, And Hazardous Waste With High Calorific Value (Including Medical Waste) |
Area (300t/D) | 40-50 Acres Higher | 30-40 Acres Lower |
Operating Cost Fly Ash Emissions | Fly Ash Discharges A Lot, Accounting For About 5% Of The Total Garbage | Fly Ash Emission Is Low, Accounting For About 1% Of The Total Garbage, Which Is Environmentally Friendly |
Acidic Substance And Dust Emission | The Original Value Of Acidic Substances Such As So2 And Nox Is Relatively High; The Dust Emission Concentration Is 6000~8000mg/Nm3 | The Original Value Of Acidic Substances Such As So2 And Nox Is Relatively Low: The Dust Emission Concentration Is ≤3000mg/Nm3 |
Plant Environment | It Is Difficult To Control The Environment In The Plant Area. The Incinerator Workshop Has A Certain Amount Of Bottom Ash And Leachate, Noise, And Odor Pollution. | The Factory Environment Is Well Controlled, And The Bottom Ash, Noise, And Odor Pollution In The Workshop Are Low |
-
Waste Gasification Power Plant
Waste gasification power plant: capacity from 1000kw to 6000kw, modular design, several modular for big capacity.
Views More -
Waste Gasifier
Waste Gasifier: single furnace treatment capacity up to 50 ton/day, it can treat household waste, industrial waste and medical waste.
Views More -
Biomass Gasification Power Plant
Biomass gasification power plant: capacity from 200kw to 3000kw, 1kg woody biomass generate 1kw electricity, 1kw woody biomass produce 2-3m3/h syngas, syngas heat value 1100-1500kcal/m3.
Views More -
Biomass Gasifier
Applicable raw materials: a wide range of raw materials, such as straw, wood chips, rice husk, palm shell, bagasse and other agricultural and forestry wastes
particle size: 30-50mm, water content: less than 20%Views More





Hydrogen and Syngas Production - MDR
We have engineered, fabricated and constructed more than 200 hydrogen and syngas plants around the world. We cover the entire range of equipment and technologies (through our strategic agreement with Lummus Technology) for hydrogen and synthesis gas production. Our process selection is project-specific based upon feedstock availability, desired
Introduction To Syngas Plant Flowsheet Options
Jul 28, 2013 · 1. Introduction to Syngas Plant Flowsheet Options By: Gerard B. Hawkins Managing Director, CEO. 2. Syngas Flowsheets – Presentation Coverage High level introduction • Mainstream syngas = steam reforming processes Ammonia; methanol; hydrogen/HyCO • Town gas Steam reforming; low pressure cyclic • Direct reduction iron (DRI) HYL type
REFORMED GAS | SYNGAS | COG - ENERGIRON
Of course, ENERGIRON plants can also use the conventional steam-natural gas reforming equipment, which has long characterized the process. Other reducing agents such as hydrogen, gases from coal, pet coke and similar fossil fuels gasifications, and coke oven gas, among others, are also potential sources of reducing gas, depending on the particular situation and availability.
Biomass Gasification Plant and Syngas Clean-up System
Aug 01, 2015 · The biomass-generated syngas consists mainly of CO, H2, CO2, CH4, N2 (if air is used as an oxidizing agent), and impurities such as tar, H2O, NH3 and H2S. Even though gasification is a well-established technology for coal, its adaptation to biomass feed is not straightforward. During biomass gasification, indeed, high amount of tar is produced
Syngas Cleanup and Purification - COSTELLO
Jul 12, 2016 · Syngas Cleanup and Purification. Syngas is an abbreviation for synthesis gas, which is a mixture comprised of carbon monoxide, carbon dioxide, and hydrogen gases. The syngas is produced by the combustion of a carbon containing compound or material in the absence of an ideal amount of air. This type of combustion is called a partial oxidation
Biomass gasification and syngas combustion for greenhouse CO2
Greenhouse carbon dioxide (CO 2) enrichment from biomass residues was investigated using exhaust gas from the combustion of syngas produced by gasification. Near complete syngas combustion is essential to achieve CO 2 levels which increase plant yields while maintaining a safe environment for workers. Wood pellets were supplied to a downdraft
Used Hydrogen (HyCo) & Syngas Plants | Phoenix Equipment
SYNGAS (HyCO) PLANT - 18,500 Nm3/hr (653,000 SCFH) Stock # 457 | Capacity 18,500 Nm3/hr (653,000 SCFH) Used 18,500 Nm3/hr (653,000 SCFH) Hydro-Chem (Now Linde) designed Syngas Reforming (Hydrogen and Carbon Monoxide) Plant built in 2016, skid mounted. Almost like new, immediately available for purchase. Operated for only a few months.
Gap Analysis for Modular Scale Pre-Combustion CO2 Capture
1 Syngas & Derivatives Market by Production Technology, Gasifier Type, Feedstock, Application and Region - Global Forecast to 2025, Report ID: 5125724 Key findings: •Global syngas production is increasing •Majority of syngas production growth is occurring in Asia (particularly China) •Most syngas is being used for production of chemicals
IHS CHEMICAL Direct Syngas to Light Olefins
Table 6.2 Light olefins production from syngas by SARI process—Main stream flows 76 Table 6.3 Light olefins production from syngas by OX-ZEO process—Major equipment 80 Table 6.4 Light olefins production from syngas by SARI process—Utilities summary 82
Linde DRYREF™ and BASF SYNSPIRE™: Smaller carbon footprint
Linde’s DRYREF™ syngas generation plant – powered by BASF’s SYNSPIRE™ G1–110 catalyst – marks an important step in the move towards clean energy and climate mitigation. Not only does it give operators a chance to shrink their carbon footprint, it also improves process efficiency. Reforming plants fitted with DRYREF require a lot
Process/Equipment Co-Simulation on Syngas Chemical Looping
Sep 30, 2012 · @article{osti_1132604, title = {Process/Equipment Co-Simulation on Syngas Chemical Looping Process}, author = {Zeng, Liang and Zhou, Qiang and Fan, Liang-Shih}, abstractNote = {The chemical looping strategy for fossil energy applications promises to achieve an efficient energy conversion system for electricity, liquid fuels, hydrogen and/or chemicals generation, while economically separate CO
Economic analysis and assessment of syngas production using a
Aug 10, 2011 · The modeling results showed that the unit cost of syngas production was $1.217 for a 60 Nm-3 h-1 capacity bio-gasifier. The operating cost was the major part of the total production cost. The equipment purchase cost and the labor cost were the largest part of the total capital cost and the total operating cost, respectively.
Syngas | Ammonia | Urea | Nitrates | Methanol | GTL
Nitrogen + Syngas Conference, to be held in Tehran, Iran on 25-26 November 2017. Iran is an important player in the global nitrogen and syngas markets due to its access to plentiful natural gas and to key demand markets. The Iranian nitrogen and syngas industry is in a period of significant development with multiple projects at both a
Syngas to Bio-ethanol Fermentation - University of Groningen
annually, the plants primary product. The process is found to be extremely energy intensive, with the plant under steady state operation estimated to consume nearly 5.93GW. Due to the large energy demands of product purification and syngas pretreatment, the project was found to be un-economical.
6.2. Syngas Contaminant Removal and Conditioning | netl.doe.gov
Conference Proceedings. 6.2. Syngas Contaminant Removal and Conditioning. Raw synthesis gas (syngas) from the high temperature gas cooling (HTGC) system needs to be cleaned to remove contaminants including fine particulates, sulfur, ammonia, chlorides, mercury, and other trace heavy metals to meet environmental emission regulations, as well as
-
Rotary Automatic Slag Burner
Applicable raw materials: wood chips, straw briquette, bark, building templates, pellets
Diameter: <10cm Moisture content: <15% -
Chain Grate Semi-Gasification Burner
Applicable raw materials: wood chips, straw briquette, bark, building templates, pellets
Diameter: <10cm Moisture content: <15% -
Waste Gasification Power Plant
Waste gasification power plant: capacity from 1000kw to 6000kw, modular design, several modular for big capacity.
-
Waste Gasifier
Waste Gasifier: single furnace treatment capacity up to 50 ton/day, it can treat household waste, industrial waste and medical waste.
-
Biomass Gasification Power Plant
Biomass gasification power plant: capacity from 200kw to 3000kw, 1kg woody biomass generate 1kw electricity, 1kw woody biomass produce 2-3m3/h syngas, syngas heat value 1100-1500kcal/m3.
-
Biomass Gasifier
Applicable raw materials: a wide range of raw materials, such as straw, wood chips, rice husk, palm shell, bagasse and other agricultural and forestry wastes
particle size: 30-50mm, water content: less than 20%