


Comparison of Grate Furnace Incineration Treatment Technology and Pyrolysis Gasification Treatment Technology | ||
Compare Content | Grate Furnace | Pyrolysis Gasifier |
Incineration Mechanism | The Garbage Is Directly Burned, The Combustion Temperature Is 800~1000°C, The Incineration Mechanism Is General | Using Two-Stage Treatment, The Garbage Is Now Pyrolyzed And Gasified, And Then Small-Molecule Combustible Gas Is Burned. The Combustion Temperature Is 850~1100℃. The Incineration Mechanism Is Advanced. |
Furnace Structure And Grate Material | The Structure Is Complex And The Shape Is Large; The Grate Works Under High Temperature, And The Requirements For The Grate Material Are High | The Structure Is Relatively Simple And Compact; The Grate Works In A Low Temperature State, And The Requirements For The Grate Material Are Low |
Types Of Garbage | Dispose Of Domestic Waste | It Can Process Domestic Waste, Industrial Waste, And Hazardous Waste With High Calorific Value (Including Medical Waste) |
Area (300t/D) | 40-50 Acres Higher | 30-40 Acres Lower |
Operating Cost Fly Ash Emissions | Fly Ash Discharges A Lot, Accounting For About 5% Of The Total Garbage | Fly Ash Emission Is Low, Accounting For About 1% Of The Total Garbage, Which Is Environmentally Friendly |
Acidic Substance And Dust Emission | The Original Value Of Acidic Substances Such As So2 And Nox Is Relatively High; The Dust Emission Concentration Is 6000~8000mg/Nm3 | The Original Value Of Acidic Substances Such As So2 And Nox Is Relatively Low: The Dust Emission Concentration Is ≤3000mg/Nm3 |
Plant Environment | It Is Difficult To Control The Environment In The Plant Area. The Incinerator Workshop Has A Certain Amount Of Bottom Ash And Leachate, Noise, And Odor Pollution. | The Factory Environment Is Well Controlled, And The Bottom Ash, Noise, And Odor Pollution In The Workshop Are Low |
-
Biomass Hydrogen Production Co-Production System
Raw materials: rice husk, straw, herb, film, coconut shell
Advantages: fixed carbon, reproducibile, high volatile, low SO2 emmission, zero CO2 emmisionViews More -
Comprehensive Utilization Of Biomass
Raw materials: rice husk, straw, herb, film, coconut shell
Main energy: biomass black carbon, biomass wood vinegarViews More -
Biomass Gasification Power Plant
Capacity: from 200kw to 3000kw
Energy: 1kg woody biomass generate 1kw electricity, 1kw woody biomass produce 2-3m3/h syngas, syngas heat value 1100-1500kcal/m3.Views More -
Biomass GasifierBiomass Pyrolysis Gasification Application Biomass Pyrolysis Gasification Advantages 1. The raw materials are widely used, wood chips, straws, granules, rice husks, coconut shells, mu...Views More





Updraft Gasifier Working Principle in Aluminum Melting Furnace
Induction furnace - Wikipedia
An induction furnace is an electrical furnace in which the heat is applied by induction heating of metal. Induction furnace capacities range from less than one kilogram to one hundred tons, and are used to melt iron and steel, copper, aluminum, and precious metals . The advantage of the induction furnace is a clean, energy-efficient and well
5.2.1. Fixed (Moving) Bed Gasifiers | netl.doe.gov
Fixed- or moving-bed gasifiers commonly operate at moderate pressures (25-30 haiqipheres). Feedstocks in the form of large coal particles 1 and fluxes are loaded into the top of the refractory-lined gasifier vessel and move slowly downward through the bed, while reacting with high oxygen content gas introduced at the bottom of the gasifier that is flowing countercurrently upward in the gasifier.
(PDF) Understanding the Aluminium Scrap Melting Proceshaiqi
Udo Boin et al.: Measuring – Modelling: Understanding the Al Scrap Melting Proceshaiqi Inside a Rotary Furnace. 1 Introduction. A rotary furnace is the preferred melting device at alumin-. ium
What Is Induction Melting & How Does It Work? | Ambrell
Induction heating is a fast, efficient, precise and repeatable non-contact method for heating metals or other electrically-conductive mahaiqials. The mahaiqial may be a metal such as brass, aluminum, copper or steel or it can be a semiconductor such as silicon carbide, carbon or graphite. To heat non-conductive mahaiqials such as plastics or glass
Electric Arc Furnace | Electrical4U
Feb 24, 2012 · It is located near to the furnace. It is well protected. The rating of large electric arc furnace may be up to 60MVA. Working Principle of Electrical Arc Furnace. The working of electric furnace includes charging the electrode, meltdown period (melting the metal) and refining. The heavy and light scrap in the large basket is preheated with the
Vacuum Induction Melting - ASM International
Fig. 3 Schematic of a top-opening, double-chamber vacuum induction melting furnace Table 1 Typical refractories used to line vacuum induction melting crucibles Refractory Maximum melt temperature Refractory density C F g/cm 3lb/in. Resistance to thermal shock Applications MgO 1600 2910 2.8 0.101 Good Superalloys, high-quality steels Al 2O
Metal Melting Furnace, Induction Metal Melting Machine for Sale
There are different types of tilting copper melting furnaces: We have hydraulic, chain, and manual. Some furnaces have a power of 25kW and adjustable power of 25kW. Their voltage is in three phahaiqi, up to 380V or above. The capacity of some copper melting furnaces ranges from 15kg to as large as 30kg.
Electric Arc Furnace: Working Principle & Types
Mar 17, 2022 · Electric arc furnaces are mainly used for melting or extracting of ferrous or non-ferrous metals which need a high temperature operation. The electric arc furnace produces an electric arc which gives an arc temperature between 3000 °C and 3500 °C on L.T. (Low Tension) operation. Basically, the electric arc is nothing but the flow electric
Working Principle of Cupola Furnace: - MechanicalJungle
A cap or cap is present at the top of the furnace spark, which traps burning particles and releahaiqi only gahaiqi into the environment. Near the top of the furnace, a charging door exists through which metal, coke, and limestone are fed into the furnace. Purpose of cupola. Here, the purpose of cupola furnace are as follows.
Updraft | Article about updraft by The Free Dictionary
A solar updraft tower is however based on a very simple principle conceived by Isidoro Cabanyes in 1903. UPDRAFT: Warm, moist air flows upward, giving the storm its energy. Severe icing is formed by an updraft that provides sufficient water vapour to maintain SLD growth, while existing shear near the cloud top supports collision-coalescence
gasifier design in Industrial Annealing Furnace-Haiqi Biomass
Biomass gasification power plant: capacity from 200kw to 3000kw, 1kg woody biomass generate 1kw electricity, 1kw woody biomass produce 2-3m3/h syngas, syngas heat value 1100-1500kcal/m3.
INDUCTION FURNACE - idc-online.com
scrap), copper, aluminium, precious metals and alloys. Even most modern foundries use this type of furnaces and now more iron foundries are replacing Cupolas with Induction Furnace to melt cast iron as the former emit lots of dust & other pollutants. The Steel making via Induction Furnace route has certain advantages & disadvantages:
State-of-the-Art of an Induction Furnace: Design
The coreless induction furnace is commonly used to melt all qualities of steels and irons as well as many non-ferrous alloys. The furnace is ultimate for re-melting and alloying because of the absolute control over temperature and chemistry. Refractory lined steel casing can be considered as the channel induction furnace comprising the molten
Induction melting furnace manufacturer, Induction furnace
Hengyang leads the top induction melting furnace manufacturer in China.We have the capability to provide a complete set of machines like induction electric furnace, metal melting furnace, steel melting furnace, and induction melting furnace.We are capable of providing complete production lines including smelting system, cooling system, dust
UPDRAFT GASIFIER for ALUMINIUM MELTING - YouTube
Up Draft Gasifier Successfully working in Aluminium Melting Plant, Using the latest technology in the field of Gasifier we are proud to present the land mark
-
Flue Gas Type Mobile Energy Station
System advantages :
1.overall container power plant output, no foundation and no installation,combined cooling, heating and power generation
2.7*24huninterrupted power generation
3.installation and ignition in the shortest time
4.5G remote data monitoring -
Gas Type Mobile Energy Station Electrical OutputSystem advantages: overall container power plant output.no foundation and noinstallation,combined cooling, heating and power generation, 7*24h uninterrupted power generation,installation and igniti...
-
Carbon Capture Technologies and Applications
Features:
1. High-efficiency refrigeration unit with stable performance
2. PLC control, good man-machine interface, easy to operate.
3. Skid-mounted design and manufacture, highly integrated, compact structure, small footprint, easy installation and maintenance -
Biomass Hydrogen Production Co-Production System
Raw materials: rice husk, straw, herb, film, coconut shell
Advantages: fixed carbon, reproducibile, high volatile, low SO2 emmission, zero CO2 emmision -
Comprehensive Utilization Of Biomass
Raw materials: rice husk, straw, herb, film, coconut shell
Main energy: biomass black carbon, biomass wood vinegar -
Low Temperature Pyrolysis Polygeneration Carbonization System
Fuel performance/H:500kw/h,1500kw/h,4000kw/h
Annual treatment:750tons/year,2300tons/year,11250tons/year
Annual biochar:220tons/year,680tons/year,3750tons/year